Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.36 JAKE BRAKE 6. Repeat step 1 through step 5 for the remaining slave piston on the same cylinder. 7. Repeat step 1 through step 5 for the remaining cylinders. EYE INJURY To avoid injury from flying parts when working with components under spring tension, wear adequate eye protection (face shield or safety goggles). FIRE To avoid injury from fire, contain and eliminate leaks of flammable fluids as they occur. Failure to eliminate leaks could result in fire. 8. Install all remaining components that were removed for this procedure. NOTE: Ensure that all wires are away from moving parts. 9. Complete the installation by installing the rocker cover. Refer to section 1.6. 10.

Start and drive the vehicle to verify proper Jake Brake performance. (Rev. 2005) All information subject to change without notice. 1-638 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION