SERIES 60 SERVICE MANUAL 9. In the event of bearing seizure, bearing overlay must be removed. Check the width of journals to determine whether the sidewalls can be reground. See Figure 1-570 for location of crankshaft dimensions. Crankshaft specifications are listed in Table 1-13. Figure 1-570 Standard Crankshaft Dimensions Table 1-13 Crankshaft Specifications 10. Visually inspect the entire crankshaft for any serious deviations from normal wear patterns, cracks, nicks or other damage. All information subject to change without notice. (Rev.
2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-645 Location Diameter, mm (in.) A 11.1 L 132.970-133.000 mm (5.235-5.236 in.) 12.7 L 133.670-133.770 mm (5.263-5.264 in.) B 80.19-80.22 mm (3.157-3.158 in.) C 131.72-131.78 mm (5.185-5.188 in.) D 49.35-49.65 mm (1.943-1.955 in.) E (11 & 12 L) 84.975-85.000 mm (3.345-3.346 in.) E (14 L) 94.975-95.000 mm (3.742-3.743 in.) F 49.45-49.55 mm (1.947-1.950 in.) G 131.72-131.78 mm (5.186-5.188 in.) H 55.77-56.07 mm (2.196-2.208 in.)