Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 1. 8929022 Dowel (Diamond) (2 places)* ‡ § 5. 8923916 1/2 in. Pipe Plug (1 place). Torque to 31-39 N·m (23-29 lb·ft). 2. 8924517 3/8 in. Pipe Plug (2 places). Torque to 24-31 N·m (18-23 lb·ft). 6. 8929163 Dowel (Diamond) * § 3. 8922327 1/4 in. Pipe Plug (4 places). Torque to 19-24 N·m (14 -18 lb·ft). 7. 8922327 1/4 in. Pipe Plug (2 places) . 4. 8929152 Dowel (Round) * 8. 8929015 Dowel (Round) * *Installed to a height of 12.0 mm ± 0.5 mm (0.472 in. ± 0.002 in.). Use tool (J–36244) to install. Use tool (J–36244–2) to install. § Refer to illustration for orientation of dowels. Required only for pressure testing of cylinder block.

In service, these plugs are replaced by the oil pressure sensor (OPS), refer to section 2.25.1, and the oil temperature sensor (OTS), refer to section 2.26.1. Figure 1-579 Left Side View All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-661