SERIES 60 SERVICE MANUAL 1. 8929022 Dowel (Diamond) (2 places)* ‡ § 5. 8923916 1/2 in. Pipe Plug (1 place). Torque to 31-39 N·m (23-29 lb·ft). 2. 8929594 3/8 in. Pipe Plug (2 places) Torque to 24-31 N·m (18-23 lb·ft). 6. 8929153 Dowel (Diamond) * § 3. 8922327 1/4 in. Pipe Plug (4 places). Torque to 19-24 N·m (14-18 lb·ft). 7. 8922327 1/4 in. Pipe Plug (2 places). Required only for pressure testing of cylinder block. In service, these plugs are replaced by the oil pressure sensor (OPS). 4. 8929152 Dowel (Round) * 8. 8929015 Dowel (Round) * *Installed to a height of 12.0 mm ± 0.5 mm (0.472 in. ± 0.002 in.) Use tool(J–36224–1) to install. Use tool (J–36224–2) to install.
§ Refer to illustration for orientation of dowels. Figure 1-585 Left Side View All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-665