2.3 N2 ELECTRONIC UNIT INJECTOR NOTICE: The hemispherical portion of the hold-down clamp washers must be installed facing the clamp (pointing down) in order to prevent damage to the washers. See Figure 2-10. 1. Injector Hold-down clamp 5. Auxiliary Injector Seal 2. Electronic Unit Injector 6. Injector O-rings 3. Injector Tube O-ring 7. Hold-down Clamp Washer 4. Injector Tube 8. Hold-down Clamp Bolt Figure 2-10 N2 Electronic Unit Injector and Related Parts (Rev. 2005) All information subject to change without notice. 2-24 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION