Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

2.5 N3 ELECTRONIC UNIT INJECTOR 2.5.1 Replacement of N3 Electronic Unit Injector To determine if replacement is necessary perform the following procedure. See Figure 2-31. NOTICE If the solenoid on N3 Electronic Unit Injector is faulty the injector must be replaced. The solenoid is not repairable. Figure 2-31 Flowchart for Replacement of N3 Electronic Unit Injector 2.5.2 Removal of N3 Electronic Unit Injector The following steps must be performed prior to removing an injector: 1. Clean the valve rocker cover around its seat on the head, and in the attaching bolt recesses. [a] To remove the one-piece rocker cover, refer to section 1.6.2.

[b] To remove the two-piece rocker cover, refer to section 1.6.3. [c] To remove the three-piece rocker cover, refer to section 1.6.5. (Rev. 2005) All information subject to change without notice. 2-46 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION