Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

2.7 FUEL PUMP WITH SEPARATE DRIVE SHAFT AND HUB 2.7 FUEL PUMP WITH SEPARATE DRIVE SHAFT AND HUB The former fuel pump system consists of the following components: Barnes positive displacement type fuel pump; separate drive shaft Air compressor drive hub Gear train mounting adaptorThis pump has been replaced, effective July 1995, with an improved fuel pump. The pumps are similar, except the improved pump has a one-piece drive. These pump assemblies are completely interchangeable. Components are not interchangeable. See Figure 2-42 for the former positive displacement gear-type fuel pump. 1. Driven Gear 10. Oil Seals 2. Plug 11. Key 3. Driven Shaft 12. Plug, Relief Valve 4. Pin 13. Drive Hub 5.

Cover 14. C-clip 6. Drive Gear 15. Drive Shaft 7. Key 16. Pump Body 8. Gasket 17. Needle Bearing 9. C-clip Figure 2-42 Former Fuel Pump Assembly with Separate Drive Shaft and Hub Assembly (Rev. 2005) All information subject to change without notice. 2-58 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION