2.22 TURBO SPEED SENSOR (TSS) NOTICE: Ensure the turbocharger rotor turns freely. If the shaft binds, the speed sensor is not aligned with the bearing spacer and damage can occur to the shaft and speed sensor. 5. Tighten the speed sensor to 10-11 N·m (90-100 lb·in.) torque. 6. Turn the turbocharger rotor to ensure it spins freely. If binding occurs it is not aligned properly. Refer to step 3. (Rev. 2005) All information subject to change without notice. 2-176 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION