2.36 EXHAUST GAS OXYGEN SENSOR FOR SERIES 60G ENGINES 2.36 EXHAUST GAS OXYGEN SENSOR FOR SERIES 60G ENGINES The Exhaust Gas Oxygen Sensor is mounted in the vehicle exhaust pipe within 12 inches of the turbocharger exhaust outlet in the top half of the pipe. The sensor is threaded into an M18 boss welded to the exhaust pipe. The sensor works in conjunction with an oxygen sensor interface module that is mounted to a sensor bracket located at the rear of the cylinder block above the flywheel housing. See Figure 2-131 and see Figure 2-132. Figure 2-131 Exhaust Gas Oxygen Sensor Figure 2-132 Oxygen Sensor Interface Module (Rev. 2005) All information subject to change without notice.
2-208 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION