Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 2.39 BAROMETRIC PRESSURE SENSOR FOR THE SERIES 60G ENGINE WITH HIGH PRESSURE FUEL SYSTEM The Barometric Pressure Sensor (BARO sensor) is mounted to the sensor bracket at the rear of the cylinder block just above the flywheel housing. The sensor sends an electrical signal to the ECM indicating barometric pressure. It is electrically connected to the ECM through the engine sensor wire harness. A hose is attached to the inlet of the sensor to protect it form dirt and prevent plugging. The ECM uses the data in controlling fuel delivery to the engine. See Figure 2-134. 1. Barometric Pressure Sensor 3. Sensor Bracket 2.

Oxygen Sensor Interface Module Figure 2-134 Barometric Pressure Sensor for Series 60G Engines All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-215