Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE Mixing rate of water and antifreeze -30 9.0 -22 2.38 9.0 2.38 50 WARNING 4 - 28 Min. atmospheric temperature °C -10 °F 14 -15 -20 -25 5 -4 -13 Amount of antifreez liter 5.4 e US gal 1.43 6.5 7.4 8.3 1.72 1.96 2.19 Amount of water liter 12.6 US gal 3.33 11.5 10.6 9.7 3.04 2.80 2.57 Volume ratio (%) 30 36 41 46 Antifreeze coolant is fla mmable, so keep it aw ay from flam Antifreeze coolant is tox ic.

When removing th e drain plug , be careful not to get water containing antifr gets in your eyes, flush your eyes with large a mount of fre sh water an d see a NOTICE Do n ot move the blade w hen the front cover an d engine sid e cover on t he left side of the machine are o covers and there is dan ger that the covers ma y be broken . Use antifreeze and ap propriate water for diluting (for details, see "COOLANT AND WATER F 4-6)") of an antifreeze density gauge to control the mixing proportions. We recommend use of an antifreeze den sity gauge to control t he Prepare a container whose capacity is la rger than t he specifie d coolant volume to catch dr 1. Stop the engine.

(1) slowly until it hits the stopper and by so e internal pressure. p (1) until it hits the next stopper, while 2. Turn radiator cap doing, relieving th e internal pressure. 3. Turn radiator ca p (1) until it hits topper, while depressing it. Ke ep turning the radia tor cap (1) until it h its the last stopper. by so 4. Remove the cov er under the front c over, then pull out drain hose (2) and inse rt it in a container to catch the drained water. 5. Open drain valve (3) and drain the w ater.