. MAINTENANCE SERVICE PROCEDURE 2. Remove four clips (2), then remove cover (3). of the air cleaner body, cover (3) and 4 - 19 REPLACING ELEME 1. Open th e engin e side cover on the right side of the chassis 3. Remove outer e lemen Do not r emove inner e lement ( 5) at this t ime, however. 4. inte evacuat or valve 5. Remove inner e lemen t (5), the n install a new inner element immediately. 6. Fit new outer el ement (4), repla ce O-ring (7) with a new part, install cover (3), then se 7. Press th e dust i ndicato r button to return t he yellow piston to its original position 8. Close th e engin e side cover on the right side of the machine.