. MAINTENANCE SERVICE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST CHECKING 1. Open the engine side cover on the right side of the chassis. 2. Standard deflection "a" between air conditioner compressor pulley (1) and drive pulley (2) when pressed with a thumb (approx. 98 N (10 kg)) should be approx. 11 to 14.5 mm (0.4 to 0.6 in). When a belt tension gauge is used, the standard tension is within a range of 353 to 530 N (36 to 54 kg). 4 - 49 CHECK WHEN CHANGING THE V-BEL The standar d deflection " a" betwe en air conditione r compressor p ulley (1) and fan pulle thumb (appr ox. 98 N (10 kg) ) shou ld be approx. 8 to 11 mm (0.32 to 0.4 in).
When a belt tension gauge i s used , the standard t ensio n is within a range of 530 to 745 REMAR When the be lt has b een r eplaced with a new part, a hig h tension i s necessary, so the in given a bove.