24. SERVICE PROCEDURE 24.4.6 CLEAN STRAINER AT BOlTOM OF FUEL TANK 1. Tighten valve @ at the bottom of the fuel tank. 2. Remove cap 0. REMARK Cap @ is brazed, so remove the strainer together with cap @_ I AE111860 3. Wash the strainer and strainer case. 4. Install cap @ securely. 24.4.7 REPLACE TRANSMISSION FILTER ELEMENT AND STEERING OIL FILTER ELEMENT (2 PLACES) 1. Remove bolt 0, then pull up cover 0. The element and valve can be removed together with cover 0. 2. Remove wing nut @ of the valve, then clean the inside of the case and the removed parts. 3. Replace element @ with a new element, then install with wing nut 0. 4. Install cover @ with bolt 0. I AE111880 3-44