74 SEBU9064 Maintenance Recommendations Fuel System - Prime i04145953 Fuel System - Prime Turn the keyswitch to the ON position for 2 minutes in order to prime the fuel system. Turn keyswitch to OFF position, then turn on again. The engine is primed and ready to start. i05337705 Fuel System Primary Filter - Replace Fuel leaked or spilled onto hot surfaces or electri- cal components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. NOTICE Ensure that the engine is stopped before any servic- ing or repair is performed. Remove the Element 1.
Turn the fuel supply valve (if equipped) to the OFF position before performing this maintenance. Illustration 45 g03381282 Typical example 2. Place a suitable container under the water separator in order to catch any fuel that might spill. Clean up any spilled fuel. Clean the outside body of the filter assembly. 3. Remove the filter bowl (4) from the fuel filter base (1). 4. Remove the O-ring seal (3). Discard the O-ring seal. 5. Remove the filter element (2) from the fuel filter base (1). Discard the filter element (2). 6. Clean the filter bowl (4). Install the Element