Yamaha Motor Corporation, USA 115D — Trimming Outboard Engine

Operation engine stop switch, then turning the main switch to “ ” (off). EMU27861 Trimming outboard motor The trim angle of the outboard motor helps determine the position of the bow of the boat in the water. Correct trim angle will help im- prove performance and fuel economy while reducing strain on the engine. Correct trim angle depends upon the combination of boat, engine, and propeller. Correct trim is also affected by variables such as the load in the boat, sea conditions, and running speed. EWM00740 WARNING Excessive trim for the operating condi- tions (either trim up or trim down) can cause boat instability and can make steering the boat more difficult.

This in- creases the possibility of an accident. If the boat begins to feel unstable or is hard to steer, slow down and/or readjust the trim angle. 1 ZMU04145 1. Trim operating angle EMU27881 Adjusting trim angle Power trim and tilt models EWM00750 WARNING G Be sure all people are clear of the out- board motor when adjusting the tilt an- gle, also be careful not to pinch any body parts between the drive unit and clamp bracket. G Use caution when trying a trim position for the first time. Increase speed gradu- ally and watch for any signs of instabil- ity or control problems. Improper trim angle can cause loss of control.

G Use the power tilt switch located on the bottom engine cowling (if equipped) only when the boat is at a complete stop with the engine off. 34