hyundai R510LC-7 — 4. TRAVEL DEVICE

FUNCTION OF RELIEF VALVE FUNCTION OF RELIEF VALVE 2) 2) Room D Room C Room B Room A Room g Piston Poppet A Orifice A A2 A1 4809S2TM04 (1) The pressured oil that flowed in A room by the neutral position of counter balance spool is applied to the seat's room B at once. The poppet A is pushed on the left side by being that the room's pressured oil is forced as much as F1=A1 Ч P1 on section A1. At the moment, the pressured oil goes through the orifice of poppet A. This oil goes into the room C and goes into the room g through the orifice A then the piston is moved on the right side. The piston is reached to the stroke end, the oil has no way to go therefore.

A resultant force on force (F2=A2 Ч P2) pushing section A2 by the pressured oil and spring force is more than the force (F1=A1 Ч P1) working on section A1 of the poppet A. During the piston is moved on the right side, the pressure of oil is kept uniformly. (2) When the pressure of oil in the room B is higher then [F2 + spring force] the poppet opens and the pressured oil goes into the room D as a relief function. In this way, by controlling the pressure in room A, B in two steps, the hydraulic motor is smoothly braked and to a stop. 2-74