hyundai R510LC-7 — 4. TRAVEL DEVICE

FUNCTION OF COUNTER BALANCE VALVE FUNCTION OF COUNTER BALANCE VALVE 5) 5) AM P BM L K H C' D' N 1' F DH Dv CH E 1 M G' Cv G AV BV 480H2TM05 Suppose port Bv is connected to the hydraulic pump and port Av, to the tank. The oil supplied from the hydraulic pump passes through Bv, Cv and C in sequence, pushes up the poppet of the check valve, passes through K to port Bm, and is supplied to the hydraulic motor to turn it. Therefore, the pump discharge oil pressure incerases, and the pressure is led via passage G to spring room E and via the ball check valve to dumping room M.

When the pressure in rooms E and M exceeds the value equivalent to the force of the spring which holds the spool at its neutral position, the spool begins to move left. Since the working oil in room N flows into room F via throuttle 1 or clearance 2 and that in room F is discharged via passage G through port Av to the tank, the spool moves left to have passage L-Dm-D-Dv composed. In addition, passage Cv-H-P is also composed, and the pump discharge pressure in port Bv is led to port P. Because of the throttle or clearance provided for the working oil flow from room N, this changeover motion of the spool is comparatively slow.

When the pump discharge pressure is higher, the spool movement is larger and above opening area of the spool is larger. When the pump discharge pressure falls, pressures in rooms E and M fall and the spool will move right due to the spring on the room F side. Since working oil in room M flows to room E via throttle 1 and that in room E, to port Bv via passage G, the spool moves right. When the presssure at port Bv, falls down to eh tank pressure, the pressure in room E also falls to the tank pressure and becomes equal to that in room F, and so the spool returns to neutral position. 2-77