hyundai R510LC-7 — 4. TRAVEL DEVICE

6) 6) FUNCTION OF HIGH/LOW SPEED CHANGEOVER FUNCTION OF HIGH/LOW SPEED CHANGEOVER As a supporting mechanism for the swash plate (203) on which the shoe (262) slide, the pillar system is adopted to support the load with semi-cylindrical sliding bearings provided at both end of the mechanism. The capacity is changed by changing the tilting angle of this swash plate. This is a mechanism that swash plate was pushed by tilting piston, and the tilting angle of the swash plate is decided in two positions ("large" and "small") by controlling has the flows to and from these piston rooms with the displacement changeover valve section.

Low speed - at pilot pressure of less than 20 Low speed - at pilot pressure of less than 20 kgf/cm kgf/cm 2 (1) (1) When no pilot pressure is supplied from (D) (at a pressure of 20 kgf/cm 2 or less), valve (65) is pressed toward the top by the force of spring (66) and (A) port or (B) port, the pressurized oil supply port (C) is shut off, and oil in chamber (P) is released into the motor case via valve (65). Consequently, swash plate (203) is tilted at a maximum angle ( Θ 1) and the piston displacement of hydraulic motor becomes maximum, thus leading to low-speed rotation.

A B X Pilot(D) 01 B A 65 66 203 262 261 C P Drain 4809S2TM06 High speed - at pilot pressure of 20 High speed - at pilot pressure of 20 kgf/cm kgf/cm 2 2 or more. or more. When a pilot pressure is supplied from port (D) (at a pressure of 20 kgf/cm 2 or more), the pressure overcomes the force of spring (66) and (A) port or (B) port of 2 speed spool (65) is pressed toward the down. The pressurized oil at supoly port (C) is then introduced into chamber (P) via 2 speed spool (65). Piston (261) pushed up swash plate (203) until it touches side X of the spindle.

(2) (2) At this time, swash plate (203) is tilted at a minimum angle ( Θ 2) and the piston displacement of hydraulic motor becomes minimum, thus leading to high-speed rotation. A B 02 X Pilot(D) 65 66 203 262 261 B A C P Drain 4809S2TM07 2-78