hyundai R510LC-7 — 2. MODE SELECTION SYSTEM

3. USER MODE SELECTION SYSTEM An operator can change the engine and pump power and memorize it for his preference. 21074OP03G To memorize the final setting, press the USER mode switch and SELECT switch one more time. 5) 34075MS11 5-5 Mode Operation U High idle rpm, auto decel rpm EPPR pressure can be modulated and memorized separately HOW TO MODULATE THE MEMORY SET 1) Each memory mode has a initial set which are mid-range of max engine speed, auto decel rpm, and EPPR valve input current. When you select M or U, cluster LCD displays. 2) To change the engine high idle speed, press the USER mode switch and SELECT switch at the same time and then ACCEL blinks at 0.5 seconds interval.

- By pressing or switch, will increase or decrease. 3) To change DECEL rpm, press the USER mode switch and SELECT switch once more and then DECEL blinks at 0.5 seconds interval. - By pressing or switch, will increase or decrease. 4) To change EPPR current, press the USER mode switch and SELECT switch one more and then EPPR blinks at 0.5 seconds interval. - By pressing or switch, will increase or decrease.

LCD segment vs parameter setting Segment ACCEL DECEL EPPR ( ) (rpm) (rpm) (mA) 1 1400 800 150 2 1450 850 200 One touch decel 3 1500 250 low idle(900) 4 1550 950 300 5 1600 Decel rpm(1000) 350 6 1650 1050 400 7 1700 1100 450 8 1750 1150 500 9 1800 1200 550 10 1850 1250 600 Segment ( ) ACCEL (rpm) DECEL (rpm) EPPR (mA) 1 1400 800 150 2 1450 850 200 3 1500 One touch decel 250 4 1550 low idle(900) 950 300 5 1600 Decel rpm(1000) 350 6 1650 1050 400 7 1700 1100 450 8 1750 1150 500 9 1800 1200 550 10 1850 1250 600