(5) Fit feedback lever(611), matching its pin hole with pin hole in spool. Then insert pin(874). Insert pin in feedback lever a little to ease operation. Take care not to mistake direction of feedback lever. Lever (1) side Lever (2) side (Fulcrum plug of adjusting plug side) 8-28 (210-7) (6) Put pilot piston(643) into pilot hole of casing. Confirm that pilot piston slides smoothly without binding. (7) Put pin force-fitted in lever(2, 613) into groove of pilot piston. Then fix lever(2). REG11 (210-7) (8) Fit fulcrum plug(614) so that pin force- fitted in fulcrum plug(614) can be put into pin hole of lever(2). Then fix locking ring(858). (9) Insert adjusting plug(615) and fit locking ring.
Take care not to mistake inserting holes for fulcrum plug and adjusting plug. At this point in time move feedback lever to confirm that it has no large play and is free from binding. (10) Fit return spring(654) and spring seat (653) into spool hole and attach snap ring (814). REG13 (210-7) 8-29 REG12 (210-7)