hyundai R510LC-7 — 3. PUMP DEVICE

(11) Fit set spring(655) to spool hole and put compensating piston(621) and piston case(622) into compensating hole. Fit pilot cover(641) and tighten it with hexagonal socket head screws(436, 438). REG14 (210-7) (12) Put spring seat(644), pilot spring(646) and adjusting ring(Q, 645) into pilot hole. Then fix spring seat(624), inner spring (626) and outer spring(625) into compen- sating hole. When fitting spring seat, take care not to mistake direction of spring seat. REG15 (210-7) (13) Install cover(C, 629) fitted with adjusting screws(628, 925), adjusting ring(C, 627), lock nut(630), hexagon nut(801) and adjusting screw(924). Then tighten them with hexagonal socket head screws(438).

This completes assembly. REG16 (210-7) 8-30