hyundai R510LC-7 — 1. PUMP DEVICE

(4) Adjustment of maximum and minimum flows 808 Adjustment of maximum flow Adjust it by loosening the hexagon nut(808) and by tightening(or loosening) the set screw(954). The maximum flow only is adjusted without changing other control characteristics. 954 2-19(1) Delivery flow, Q Pilot pressure, P i 808 953 2-19(2) Delivery flow, Q Pilot pressure, Pi 2-20 Speed (min -1) Adjustment of max flow Tightening amount of adjusting screw (954) (Turn) Flow change amount ( /min) 1900 +1/4 -7.3 Adjustment of minimum flow Adjust it by loosening the hexagon nut(808) and by tightening(or loosening) the hexagonal socket head set screw (953).

Similarly to the adjustment of the maximum flow, other characteristics are not changed. However, remember that, if tightened too much, the required horsepower during the maximum delivery pressure(or during relieving) may increase. Speed (min -1) 1900 Speed (min -1) Adjustment of min flow Tightening amount of adjusting screw (953) (Turn) Flow change amount ( /min) 1900 +1/4 +7.3