24) After adjusting the intake and exhaust valve clearances of the No.1 cylinder, turn the crankshaft pulley clockwise by increments of 180° and bring the piston of each cylinder at the top dead center of its compression stroke. Repeat the procedure from step 18 through step 23. [1] No.3 PISTON AT TOP DEAD CENTER OF COMPRESSION STROKE: [5] INTAKE SIDE [4] EXHAUST SIDE No.1 No.1 No.2 No.2 [2] No.4 PISTON AT TOP DEAD CENTER OF COMPRESSION STROKE: No.3 No.3 No.4 No.4 [3] No.2 PISTON AT TOP DEAD CENTER OF COMPRESSION STROKE: 3-14