Removal: [1] FUEL TUBE E WARNING Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. [2] TUBE CLIPS (Commercially available) • Keep heat, sparks and flame away. • Handle fuel only outdoors. • Wipe up spills immediately. 1) Clamp the fuel tube C and E securely with the two commercially available tube clips. [3] FUEL TUBE C 2) Remove the strainer suspension from the fuel strainer stay. [1] FUEL STRAINER STAY 3) Disconnect the fuel tube C and E from the fuel strainer (low pressure side). Remove the strainer suspension from the fuel strainer cup.
Before disconnecting the fuel tubes, be sure to clamp the fuel tubes with a tube clips to prevent the gasoline from leaking. [2] STRAINER SUSPENSION Disassembly/Cleaning: 1) Remove the three 5 x 12 mm screws from the fuel strainer body, then remove the plate and the fuel strainer cup. [1] PLATE 2) Clean the water or sediment in the cup, and if necessary, replace the strainer. [2] 5 x 12 mm SCREW (3) 3) Replace the O-ring with a new one on assembly. Assembly: [3] FUEL STRAINER CUP 1) Install a new fuel strainer on the fuel strainer body. [6] O-RING 2) Set a new O-ring on the fuel strainer cup. Install the fuel strainer cup and the plate on the fuel strainer body.
3) Tighten the three 5 x 12 mm screws to the specified torque. TORQUE: 3.4 N . m (0.35 kgf . m, 2.5 lbf . ft) [5] FUEL STRAINER [4] FUEL STRAINER BODY 3-16