4) Install the strainer suspension on the fuel strainer cup so that its projections are at the fuel strainer body side. [1] FUEL STRAINER BODY 5) Install the fuel strainer (low pressure side) on the fuel strainer stay securely. [2] PROJECTIONS [3] FUEL STRAINER STAY [4] STRAINER SUSPENSION 6) Check that the center of the 5 x 12 mm screw at the fuel tube C installation part is in line with the center of the strainer suspension as shown. [1] FUEL STRAINER STAY [2] “ ” MARK 7) Connect the fuel tube C to the “ ” mark side of the fuel strainer. Connect the fuel tube E to the “ ” mark side of the fuel strainer. [3] FUEL TUBE E After connecting the tubes, check for gasoline leakage.
8) Install the engine cover (P. 4-2). [5] “ ” MARK [4] FUEL TUBE C [7] STRAINER SUSPENSION [6] 5 x 12 mm SCREW [8] Screw center must be in line with the suspension center. 3-17