honda — Maintenance

3) Install the strainer suspension on the water separator cup so that its projections are at the water separator body side. [1] WATER SEPARATOR BODY 4) Install the water separator with water level sensor on the fuel strainer stay securely. [2] PROJECTIONS [4] FUEL STRAINER STAY [3] STRAINER SUSPENSION 5) Check that the center of the 5 x 12 mm screw at the fuel tube A installation part is in line with the center of the strainer suspension as shown. [2] FUEL TUBE C [1] ” MARK 6) Connect the fuel tube A to the “ ” mark side of the water separator with water level sensor. Connect the fuel tube C to the “ ” mark side of the water separator with water level sensor.

[3] FUEL STRAINER STAY After connecting the tubes, check for gasoline leakage. [5] ” MARK [4] FUEL TUBE A [6] 5 x 12 mm SCREW [7] STRAINER SUSPENSION [8] Center of screw must be in line with suspension center. 3-21