honda — Maintenance

Check item: [1] 5 x 16 mm HEX. BOLT 1) Remove the remote control box cover B and C (P. 16-2). 2) Move the remote control lever to the full open position and be sure that the link joint arm is in contact with the 5 x 16 mm hex. bolt. If not in contact, tighten the 5 x 16 mm hex. bolt unit it contacts the link joint arm. 3) Install the remote control box cover B and C (P. 16-2). [2] LINK JOINT ARM 13. REMOTE CONTROL LEVER FRICTION Inspection/Adjustment: 1) Check the remote control lever for smooth operation. If the lever movement is too light or too heavy, adjust the friction. 2) Adjust by turning the friction adjusting bolt right or left. [1] FRICTION ADJUSTING BOLT 14.

ALTERNATOR BELT Inspection: 1) Remove the engine cover (P. 4-2). Remove the silencer duct assembly (P. 3-11 and 12). 2) Check the alternator belt for wear and damage. Replace the alternator belt if necessary (P. 3-29). 3) Check the alternator belt and the related parts for stain with oil, etc. If stained, clean the stained parts and replace the alternator belt. 4) Check the belt tension and belt deflection (P. 3-29). [1] ALTERNATOR BELT 3-28