h. ENGINE COVER DISASSEMBLY Remove the hook bracket assembly (P. 4-2). [1] ENGINE COVER AIR GUIDE [2] 4 x 10 mm SELF- TAPPING SCREW (8) [3] ENGINE COVER i. ENGINE COVER ASSEMBLY 1) Clean the engine cover and engine cover air guide mating surfaces. [1] Apply the sealant. (Shin-Etsu Chemical KE45 or equivalent) 2) Apply the sealant (Shin-Etsu Chemical KE45 or equivalent) to the indicated position of the engine cover air guide. 3) Tighten the engine cover air guide with the eight 4 x 10 mm self-tapping screws securely. 4) Install the hook bracket assembly (P. 4-4). 4-6