3) Loosely tighten the three 6 x 25 mm screws and one 6 x 17 mm special bolt. [2] 6 x 17 mm SPECIAL BOLT [1] 6 x 25 mm SCREW (3) Check that the special bolt is not on the case but it is tightened properly. 4) Tighten the 6 x 25 mm screws and the 6 x 17 mm special bolt securely in the numbered sequence shown in two or three steps. 5) Install the undercase grommet band on the remote control cable grommet and fasten the band securely. ① ② Install the engine cover (P. 4-2). ④ ③ [3] UNDERCASE GROMMET BAND 4-8