12) Apply marine grease to the outer surface of the 10 mm washer, two 10 mm wave washers and the cover lock bushing A and to the inner wall of the lock front shaft hole in the under cover front bracket. 13) Install the two cover lock bushing As, 10 mm washer and the two 10 mm wave washers on the cover lock lever as shown. Install the cover lock lever on the under cover front bracket. 14) Install the lock front shaft. Install the 8 mm washer and the 6 mm E-ring on the lock front shaft.
[1] LOCK FRONT SHAFT [2] UNDER COVER FRONT BRACKET [5] (MARINE GREASE) [9] COVER LOCK BUSHING A (2) [3] 8 mm WASHER [8] 10 mm WASHER [7] 10 mm WAVE WASHER (2) [6] COVER LOCK LEVER [5] (MARINE GREASE) [4] 6 mm E-RING e. R. SIDE COVER BRACKET/L. SIDE COVER BRACKET/UNDER COVER FRONT BRACKET INSTALLATION [1] R. SIDE COVER BRACKET 1) Install the R. side cover bracket with the two 6 x 22 mm flange bolts. 6 x 22 (2) 2) Install the L. side cover bracket with the two 6 x 55 mm flange bolts. 4-30 [1] L. SIDE C BRACKET 8 x OVER 55 (2)