BF135A•BF150A 5-12 • QUICK REFERENCE CHART OF TROUBLESHOOTING BY SYSTEM When the MIL does not come ON but the engine becomes faulty, refer to the following troubleshooting chart and check the parts in the numbered order shown on the chart. Idle Control System Check point Symptom Ref. page Idle adjusting screw IAC valve Neutral switch Vacuum pipe 5-94 5-95 17-13 5-5 Engine does not start 2 1 Engine starts but stalls soon 1 2 3 Engine speed is higher than the specified idle speed after warm up. 3 2 1 Engine speed is higher than the specified trolling speed after warm up. 3 4 1 2 Engine speed is lower than the specified idle speed after warm up.
2 1 3 Engine speed is lower than the specified trolling speed after warm up. 2 1 3 Engine speed is not stable during idling and trolling. 2 1 4 3 Low Pressure Fuel Supply System Check point Symptom Ref. page Low pressure fuel line Water separator Low pressure fuel strainer Low pressure fuel pump Vapor separator 5-104 3-19 3-15 5-142 5-111 Engine does not start 3 1 2 4 Engine starts but stalls soon 3 1 2 4 Engine speed is not stable during idling and trolling, or engine stalls. 1 2 Engine sometimes misfires or stalls soon 3 1 2 4 Engine stalls soon at hot restart of the engine. 1 High Pressure Fuel Supply System Check point Symptom Ref.
page High pressure fuel line High pressure fuel pump High pressure fuel strainer Fuel injector Pressure regulator 5-104 5-107 3-18 5-105 5-106 Engine does not start 1 2 3 Engine starts but stalls soon 1 2 3 Engine speed is not stable during idling and trolling, or engine stalls. 1 2 3 Engine speed does not rise 1 3 3 3 2 Engine sometimes misfires or stalls soon 1 3 2 3