BF135A•BF150A 3. IGP power line check -1. Turn the ignition switch OFF. Disconnect the PGM-FI main relay 6P connector. -2. Turn the ignition switch ON. Measure the voltage between the No. 2 (Black/Yellow) terminal of the PGM- FI main relay harness side 6P connector and the engine ground. 4. ECM power line check -1. Turn the ignition switch OFF and disconnect the fuse box 3P connector. -2. Turn the ignition switch ON. Measure the voltage between the No. 3 (Yellow/Black) terminal of the fuse box side 3P connector and the engine ground.
PGM-FI MAIN RELAY HARNESS SIDE 6P CONNECTOR FUSE BOX SIDE 3P CONNECTOR BLACK/YELLOW YELLOW/BLACK VIEWED FROM THE TERMINAL SIDE VIEWED FROM THE TERMINAL SIDE Is there the battery voltage? YES – Go to the step 3. NO – The PGM-FI main relay is faulty, or the fuse box is faulty. Is there the battery voltage? YES – Go to the step 3. NO – Repair open in the main harness. -3. Turn the ignition switch OFF and disconnect the ECM connector C. -4. Check for the continuity between the No. 2 (Yellow/ Black) terminal of the fuse box harness side 3P con- nector and the respective terminals of the No. 1 (Yellow/Black) and No. 5 (Yellow/Black) terminals of the ECM connector C. -3.
Turn the ignition switch OFF. Check for continuity between the No. 6 (Black) terminal of the PGM-FI main relay 6P connector and the engine ground. PGM-FI MAIN RELAY HARNESS SIDE 6P CONNECTOR BLACK ECM CONNECTOR C FUSE BOX HARNESS SIDE 3P CONNECTOR IGP2 (YELLOW/BLACK) VIEWED FROM THE TERMINAL SIDE IGP1 (YELLOW/BLACK) YELLOW/BLACK Is there the continuity? YES – Perform “4. ECM power line check”. NO – Repair open in the main harness (Black). VIEWED FROM THE TERMINAL SIDE Is there the continuity? YES – Perform “5. MIL power line check”. NO – Repair open in the wire of the main harness. 5-19