honda — Programmed Fuel Injection

BF135A•BF150A • Discharge Volume Check PRESSURE REGULATOR Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. Keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately. Use a known-good battery for discharge volume check. 1) Turn the ignition switch OFF. 2) Disconnect the pressure regulator return hose from the pressure regulator, and connect a hose that is equivalent to the pressure regulator return hose to the pressure regula- tor. PRESSURE REGULATOR RETURN HOSE PRESSURE REGULATOR 3) Turn the ignition switch ON. Operate the fuel pump for approximately 2 seconds and measure the gasoline dis- charge volume.

4) If gasoline is not discharged or the discharge volume is too small, check the following and replace the fuel pump (P. 5- 121). Clogged high pressure side fuel filter Clogged high pressure side fuel hose/pipe Faulty pressure regulator 5) If the high pressure side fuel pump is normal, connect the 2P connector. Set the connector on the connector bracket. FUEL PUMP 2P CONNECTOR CONNECTOR BRACKET 5-108 Standard discharge volume 45 cc (4.75 cu in) or more