honda — Programmed Fuel Injection

BF135A•BF150A 7) Remove the four 5 mm screw-washers. Remove the con- nector bracket and pump cover. 8) Remove the O-ring from the pump cover and discard it. Replace the O-ring with a new one on assembly. 9) Remove the pump holder. 10) Remove the 4 mm screw and 4 mm washer, then remove the pump harness assembly. [2] 4 mm SCREW [3] 4 mm WASHER [1] 5 mm SCREW- WASHER (4) [4] PUMP HARNESS ASSEMBLY [8] PUMP COVER [7] PUMP HOLDER [5] CONNECTOR BRACKET [6] O-RING Do not reuse. 5-114