BF135A•BF150A 11) Remove the O-ring and the seal ring. Replace the O-ring with a new one on assembly. [1] O-RING [3] PLATE [2] INSULATOR Do not reuse. 12) Remove the plate and the insulator. 13) Remove the high pressure side fuel pump, pump holder and the O-ring. Replace the O-ring with a new one on assembly. [6] SEAL RING [5] FUEL PUMP (HIGH PRESSURE SIDE) [4] PUMP HOLDER [1] O-RING Do not reuse. 14) Remove the four 6 x 25 mm flange bolts. Remove the fuel pump case and the two O-rings. Replace the O-rings with the new ones on assembly. [1] O-RING Do not reuse. 6 x 25 (4) [2] FUEL PUMP CASE 5-115