BF135A•BF150A 15) Remove the eight 5 mm screw-washers and the eight 6 mm washers. Remove the water jacket cover and the cover gas- ket. Replace the cover gasket with a new one on assembly. [1] COVER GASKET Do not reuse. [2] 5 mm COLLAR (8) [9] TUBE CLIP [8] 7 x 400 mm WATER TUBE [7] 7.3 x 350 mm WATER TUBE [4] 5 mm SCREW- WASHER (8) [6] TUBE CLIP B12 [5] WATER JACKET COVER [1] 5 mm SCREW- WASHER (6) [2] VAPOR SEPARATOR COVER [3] COVER GASKET [4] FLOAT VALVE Do not reuse.
[10] COLLAR (2) [5] FLOAT PIN [9] VAPOR SEPARATOR GROMMET (2) [6] SCREW (2) [7] VAPOR SEPARATOR CHAMBER 5-116 [3] 5 mm WASHER (8 ) 16) Remove the six 5 mm screw-wa separator cover and the cover ga Replace the cover gasket with a 17) Remove the two screws. Then, and the float valve. 18) Remove the two 6 x 16 mm fla vapor separator stay. shers. Remove th sket. new one on assemb remove the float, nge bolts and rem 6 x 16 (2) [8] VAPOR SEP STAY ARATOR