BF135A•BF150A 14) Connect the fuel pump 2P connector and set the connector on the connector bracket. [1] HARNESS BAND CLIP [3] FUEL PUMP 2P CONNECTOR [2] CLAMPS 15) Install the harness band clip on the connector bracket in the position shown in the drawing. 16) Secure the cover lock cable and the fuel hose with the clamps. [6] FUEL TUBE [4] CONNECTOR BRACKET [5] COVER LOCK CABLE 17) After assembly, check each fuel tube and clamp and check that they are not interfering with the neighboring parts. [1] PRESSURE REGULA- TOR RETURN HOSE [2] FUEL HOSE (HIGH PRESSURE SIDE) 18) Turn the ignition switch ON. Check that the fuel pump turns for 2 seconds and that there is no fuel/water leakage.
[4] FUEL TUBE B [3] WATER TUBE 5-127