BF135A•BF150A 9) Disconnect the pressure regulator vacuum tube from the intake manifold joint. [1] PRESSURE REGULATOR VACUUM TUBE [2] INTAKE MANIFOLD JOINT 10) Remove the two 8 x 55 mm flange bolts and remove the L. side cover bracket. The L. side cover bracket can be removed without dis- connecting the cover lock cable. [1] L. SIDE COVER BRACKET 8 x 55 (2) 11) Remove the five 8 x 35 mm flange bolts, two 8 mm washers and the two 8 mm flange nuts. Remove the intake manifold assembly. [1] 8 mm WASHER 8 x 35 (5) [3] INTAKE MANIFOLD ASSEMBLY [2] 8 mm FLANGE NUT (2) 5-130