honda — Programmed Fuel Injection

BF135A•BF150A 5-131 c. INTAKE MANIFOLD DISASSEMBLY/ASSEMBLY [2] SOLENOID VALVE TUBE ASSEMBLY: Connect the solenoid valve tube to the top of the intake air cut-off solenoid valve, and the diaphragm tube to the lower joint of the intake air [1] cut-off solenoid valve. INTAKE MANIFOLD GASKET (4) [2]-1 DIAPHRAGM ASSEMBLY: [2] SOLENOID VALVE TUBE ASSEMBLY: Connect the solenoid valve tube to the top of the intake air cut-off solenoid valve, and the diaphragm tube to the lower joint of the intake air cut-off solenoid valve. [2]-1 DIAPHRAGM TUBE • Do not reuse. • Install by aligning the projection on the gasket with the groove in [2]-2 the intake manifold.

SOLENOID [2]-3 UP VALVE TUBE [1]-1 PROJECTION 8 x 60 (4) [3] 22 N·m (2.2 kgf·m, [1]-2 DIAPHRAGM TUBE 16 lbf·ft) GROOVE [4] INTAKE AIR CUT-OFF SOLENOID VALVE [12] COLLAR (2) 5 x 12 [11] GROMMET (2) [10] THROTTLE BODY [9] THROTTLE BODY GASKET [5] Do not reuse. SHUTTER VALVE DIAPHRAGM INSPECTION: P. 5-110 Do not disassemble the [8] shutter valve diaphragm. IAC VALVE GASKET Replace as an assembly Do not reuse. of the intake manifold assembly. [6] TUBE [2]-2 SOLENOID [2]-3 UP VALVE TUBE [7] IAC VALVE INTAKE MANIFOLD ASSEMBLY 8 x 45 (2) 22 N·m (2.2 kgf·m, 16 lbf·ft)