honda — Programmed Fuel Injection

BF135A•BF150A 9) Connect the vacuum tube to the pressure regulator. [1] PRESSURE REGULATOR VACUUM TUBE [2] INTAKE MANIFOLD JOINT 10) Install the L. side cover bracket assembly and tighten the two 8 x 55 mm flange bolts securely. [1] L. SIDE COVER BRACKET 8 x 55 (2) 11) Connect the MAP sensor 3P connector and set the harness band clip in the hole in the sensor set plate. [1] MAP SENSOR 3P CONNECTOR [2] HARNESS BAND CLIP 12) Connect the TP sensor 3P connector and set the harness band clip in the hole in the harness clip bracket E. [1] TP SENSOR 3P CONNECTOR [2] WATER LEVEL SENSOR CONNECTOR 13) Install the water level sensor connector on the harness clip bracket E.

[4] HARNESS BAND CLIP [3] HARNESS CLIP BRACKET E 5-134