BF135A•BF150A 7) Disconnect the pressure regulator control tube and the pres- sure regulator return hose from the pressure regulator. 8) Remove the pressure regulator. Remove the joint pipe and the O-rings. Replace the O-rings on assembly. 9) Remove the 6 x 25 mm flange bolt and remove the fuel hose (high pressure side). 10) Remove the joint pipe and the O-rings. Replace the O-rings on assembly. 11) Release the fuel tube (2 places) and the air vent tube (2 places) from the 14 mm fuel tube clips. [1] AIR VENT TUBE 12) Remove the two 6 mm flange nuts and remove the fuel line assembly.
[2] FUEL LINE ASSEMBLY [5] FUEL TUBE [4] 14 mm FUEL TUBE CLIP [3] 8 mm FLANGE NUT (2) 5-137 1] [2] PRESSURE REGULATOR TUBE CLAMP CONTROL TUBE D10.7 [3] PRESSURE REGULATOR 6] RESSURE EGULATOR ETURN [4] O-RING (2) OSE Do not reuse. [5] JOINT PIPE [4] O-RING (2) [5] JOIN Do not reuse. T PIPE Do not reuse. [1] JOINT PIPE [3] [2] O-RING (2) FUEL HOSE Do not reuse. (HIGH PRESSURE SIDE) 6 x 25