honda — Programmed Fuel Injection

BF135A•BF150A b. FUEL TUBE ASSEMBLY DISASSEMBLY/ASSEMBLY Replace the O-rings with the new ones and apply the engine oil to the new O-rings before installation. [1] 7.85 x 3.53 mm O-RING (4) 6 x 10 (4) [2] INJECTOR CLIP (4) Do not reuse. [3] 14 mm FUEL TUBE CLIP (4) [7] INJECTOR (4) [6] 7.47 x 3.6 mm O-RING (4) [4] CLIP BRACKET (4) Do not reuse. 6 x 14 (4) [5] FUEL TUBE • INJECTOR INSTALLATION Apply the engine oil to the new O-rings and install them on the respective injectors. Install the injectors aligning the projection with the groove in the fuel line. [1] INJECTOR [2] PROJECTION [3] INJECTOR CLIP (4) 5-138