honda — Alternator

14) Remove the four screws and the retainer plate. [2] SCREW (4) Remove the two stud bolts from the stator [drive end housing]. [1] RETAINER PLATE [4] STATOR [DRIVE END HOUSING] [3] STUD BOLT (2) 15) Check the front bearing for abnormal sound or play before removal. Replace the front bearing if necessary. 16) Holding the stator [drive end housing] by attaching the wood blocks to both sides of the stator [drive end housing] as shown, remove the front bearing from the stator using the special tools. [1] DRIVER 07749-0010000 Replace the front bearing with a new one on assembly. [2] FRONT BEARING TOOLS:

Driver 07749-0010000 Attachment, 24 x 26 mm 07746-0010700 Pilot, 15 mm 07746-0040300 [4] ATTACHMENT, 24 x 26 mm 07746-0010700 [3] PILOT, 15 mm 07746-0040300 6-13