4) Position a washer on the rotor shaft. [1] REAR BEARING Apply grease to the inner wall of the new rear bearing and install it on the rotor shaft. [2] WASHER [3] ROTOR SHAFT 5) Attach the special tool to the front bearing side of the rotor shaft, and position the rotor on the hydraulic press. [1] FRONT BEARING SIDE TOOL: Attachment, 52 x 55 mm 07746-0010400 [2] ROTOR SHAFT [3] ATTACHMENT, 52 x 55 mm 07746-0010400 6) Attach the special tool to the rear bearing side and install the rear bearing on the rotor using the hydraulic press. TOOLS: Attachment, 52 x 55 mm 07746-0010400 Driver, 22 mm I.D. 07746-0020100 Attachment,15 mm I.D. 07746-0020200 [1] DRIVER, 22 mm I.D.
07746-0020100 [2] ATTACHMENT, 15 mm I.D. 07746-0020200 [3] REAR BEARING 6-18