j. INSTALLATION 1) Position the alternator assembly over the tensioner bolt and loosely tighten the 8 mm flange nut. 2) Position the alternator assembly between the projections of the alternator bracket and loosely tighten the 10 x 80 mm flange bolt. 10 x 80 [1] ALTERNATOR ASSEMBLY [2] 8 mm FLANGE NUT [3] TENSIONER BOLT 3) Install the alternator belt on the crankshaft pulley first, then on the alternator pulley. [1] ALTERNATOR BELT Do nut turn the crankshaft pulley counterclockwise. NOTICE [2] CRANKSHAFT PULLEY [3] ALTERNATOR PULLEY 6-23 [4] Between t projection he s