honda — Crankshaft Pulley/Cam Chain

18) Wipe up oil thoroughly from the threaded part of the crankshaft where the 16 x 49 mm bolt-washer is tightened, and from the crankshaft pulley and the 16 x 49 mm bolt- washer with a clean shop towel. : [1] Wipe up contamination. : [2] Apply engine oil. : [3] Degrease with degreasing cleaning agent. 19) Wipe up oil from the boss on the side of the crankshaft pulley with a clean shop towel sprayed with the degreasing cleaning agent. [4] 16 x 49 mm BOLT-WASHER 20) Apply the engine oil to the threads and the seating surface of the 16 x 49 mm bolt-washer.

[5] CRANKSHAFT PULLEY [6] CRANKSHAFT 21) Position the 4.5 x 21 mm key and the crankshaft pulley on the crankshaft, then loosely tighten the 16 x 49 mm bolt- washer. [1] 16 x 49 mm BOLT-WASHER [2] CRANKSHAFT PULLEY [3] 4.5 x 21 mm KEY 9-17