22) Tighten the 16 x 49 mm bolt-washer to the specified torque using the special tools as shown. TOOLS: Handle 07JAB-001020B Pulley holder attachment, HEX 50 mm 07JAB-0010400 Socket wrench, 19 mm 07JAA-001020A [1] HANDLE 07JAB-001020B TORQUE: 245 N . m (25.0 kgf . m, 181 lbf . ft) [2] SOCKET WRENCH, 19 mm 07JAA-001020A [3] PULLEY HOLDER ATTACHMENT, HEX 50 mm 07JAB-0010400 23) Connect the CKP sensor 3P connector to the CKP sensor. [1] CKP SENSOR 3P CONNECTOR [2] CKP SENSOR 9-18