honda — Cylinder Heads/Valves

• VALVE STEM-TO-VALVE GUIDE CLEARANCE If the stem-to-guide clearance exceeds the service limit, replace the valve and the valve guide as a set (P. 10-26). NOTICE Recondition the valve seat whenever replacing the valve guide (P. 10-28). • VALVE SEAT WIDTH If the valve seat width is under the standard, or over the service limit, or if the valve seat is too high/low, recondition the valve seat (P. 10-28).

[1] VALVE SEAT TOO LOW [2] SEAT WIDTH [3] VALVE SEAT TOO HIGH • VALVE INTALLATION HEIGHT [1] INTALLATION HEIGHT 10-24 STANDARD SERVICE LIMIT IN 0.030 – 0.055 mm (0.0012 – 0.0022 in) 0.08 mm (0.003 in) EX 0.055 – 0.080 mm (0.0022 – 0.0031 in) 0.11 mm (0.004 in) STANDARD SERVICE LIMIT IN/EX 1.25 – 1.55 mm (0.049 – 0.061 in) 2.0 mm (0.08 in) STANDARD SERVICE LIMIT IN/EX 44.0 – 44.6 mm (1.73 – 1.76 in)