honda — Cylinder Heads/Valves

10. CYLINDER HEAD ASSEMBLY ASSEMBLY [1] VALVE SPRING SEAT 1) Apply molybdenum disulfide oil to the valve stem sliding surface and insert the valve into the valve guide. Check that the valve moves up and down smoothly. NOTICE [2] MOLYBDENUM DISULFIDE OIL Do not confuse the intake valve and the exhaust valve on assembly. 2) Install the valve spring seat. [3] VALVE 3) Apply engine oil to the inner wall of a new valve stem seal. Set the valve stem seal in the special tool, and push it straight into the valve guide by hand. [1] SPRING (WHITE) [2] SPRING (BLACK) TOOL:

Stem seal driver 07PAD-0010000 NOTICE Note that the valve stem seal A (intake side) has the white spring and the valve stem seal B (exhaust side) has the black spring. Do not confuse them on assembly. [4] VALVE STEM SEAL A (INTAKE SIDE) [3] VALVE STEM SEAL B (EXHAUST SIDE) [5] VALVE STEM SEAL 10-30 [6] STEM SEA DRIVER 07PAD-00 L 1000